that can be switched between 10 and 12-bit operation so that customers can select the desired a/d converter bit depth. sony has developed two other related products: the imx035llr (a black-and- white device) that includes a black filter (functions as a mask) and achieves a peak sensitivity value about twice that of the IMX035LQR, and the imx035lqz (a color device) that adopts the qfn package for easier mounting. all three products are provided in packages that can withstand high-temperature reflow soldering (peak temperature: 260c). possible to image subjects in low light using a lower gain setting, and even when the gain is increased, noise is suppressed. as a result, this device produces high signal-to-noise ratio video.
1: see the featuring article in sony cx-news vol.47. in addition to the all 1.3m-pixel scan mode, the IMX035LQR also provides a horizontal and vertical 2/2-line addition mode, a vertical 1/2 elimination mode, and a window cropping mode. furthermore, sony has newly added an hd720p mode that supports 720p high- definition tv readout. thus the IMX035LQR provides the functions required to support a wide range of user needs as a high-speed cmos sensor for industrial applications. the IMX035LQR adopts a low-voltage lvds 1-port ddr output method for small- signal data output, and thus achieves both high frame rate readout and low i/o noise levels. this device's high frame rate readout mode can acquire video images at up to 120 frame/s (in 10-bit a/d conversion mode) in all 1.3m-pixel scan mode. the IMX035LQR also provides a cmos 1-port sdr output for the all 1.3m-pixel scan mode at 30 frame/s. this mode can be selected according to the application or mounting conditions. other features include internal a/d converters diagonal 6.08 mm (type 1/3) 1.39m-effective pixel color cmos sensor for industrial applications achieves a high frame rate and a high s/n ratio sony has now developed the IMX035LQR cmos sensor for industrial applications, a device that achieves both a high frame rate and a high signal-to-noise ratio. the IMX035LQR provides the resolution of a 1.3m-pixel sensor and can produce a maximum frame rate of 120 frame/s (in 10-bit a/d conversion mode). using pixel technologies fostered in sony's ccd development work, the IMX035LQR achieves high signal-to-noise ratio and high sensitivity characteristics that are not available in existing industrial cmos sensors. sony has also developed a black-and-white version (imx035llr) in the same package and a package variant color product (imx035lqz) at the same time. extensive set of drive modes high sensitivity (460 mv typ.) high signal-to-noise ratio (+3 db compared to existing sony products) extensive set of drive modes switchable i/o interface built-in 10 and 12-bit a/d converters IMX035LQR to achieve a high signal-to-noise ratio in the IMX035LQR, sony adopted their unique column-parallel a/d conversion method* 1 in this device. this technology is highly respected since it aims at reducing circuit noise and furthermore achieving high sensitivity even during high-speed operation using the sensitivity increasing pixel technologies developed in sony's work on ccds. compared to sony's existing imx012, the IMX035LQR achieves a sensitivity 1.5 or more times higher at an operating frame rate of 30 frame/s (ta = 60c). this makes it high sensitivity and signal-to- noise ratio characteristics in developing the imx035, our group consisted of designers from several related divisions and it was a pleasure to proceed with this development while sharing our various experiences and specialized areas of expertise. while there were several issues to be solved, including signal-to-noise ratio and sensitivity characteristics under low ambient light levels and high-speed operation, we took the time to solve these one at a time and as a result created a product that will respond to our customers' desires. we strongly recommend that you take a look at the images produced by this device. * : ?exmor? is a trademark of sony corporation. ?exmor? is a version of sony?s high performance cmos sensor with high-speed processing, low noise and low power dissipation by using column-parallel a/d conversion. i/o interface switching function imx035llr and imx035lqz www.datasheet.co.kr datasheet pdf - http://www..net/
device structure comparison table 1 image sensor characteristics table 2 optical black front: 44 pixels, rear: 7 pixels front: 24 pixels, rear: 3 pixels number of dummy bits front: 4 pixels, rear: 0 pixels horizontal vertical horizontal vertical front: 0 pixels, rear: 0 pixels horizontal drive frequency 54 mhz package lga (152 pins)/qfn (46 pins) supply voltages v dd /v l (typ.) 3.0 v/1.8 v unit cell size 3.63 m (h) 3.63 m (v) chip size 7.64 mm (h) 7.64 mm (v) number of effective pixels approx. 1.39m (1329h 1049v) total number of pixels approx. 1.49m (1384h 1076v) transfer method all-pixel image size diagonal 6.08 mm (type 1/3) item imx035 front: 8 pixels, rear: 0 pixels front: 16 pixels, rear: 16 pixels front: 0 pixels, rear: 74 pixels front: 36 pixels, rear: 13 pixels 50 mhz/27 mhz qfn (44 pins) 2.7 v/1.8 v 2.925 m (h) 2.925 m (v) 6.452 mm (h) 6.402 mm (v) approx. 1.28m (1296h 985v) approx. 1.33m (1304h 1017v) all-pixel diagonal 4.74 mm (type 1/3.8) imx012 front: 12 pixels, rear: 40 pixels front: 8 pixels, rear: 2 pixels front: 4 pixels front: 2 pixels 36 mhz (ntsc) 29 mhz (pal) dip (24 pins) 15 v/?.5 v/3.6 v 3.75 m (h) 3.75 m (v) 6.26 mm (h) 5.01 mm (v) approx. 1.25m (1296h 966v) approx. 1.32m (1348h 976v) interline diagonal 6.0 mm (type 1/3) icx445 min. saturation signal 830mv sensitivity (f5.6) typ. 460mv item imx035 550mv 290mv imx012 350mv 460mv icx445 ta = 60c 3200k, 706 cd/m 2 remarks 2500lx, gain analog 6 db 10lx, gain analog 18 db, gain digital 6 db sample images (1.3m-pixel images at 120 frame/s) photograph 1 www.datasheet.co.kr datasheet pdf - http://www..net/
|
